Cable Bracing System Attachments

Information

Fig. 991
Fast Attach - Cable Sway Brace Attachment

• Cable attachment for sway bracing. Attaches sway brace to hanger rod. To be used with 7 x 19 strand core pre-stretched galvanized aircraft cable.
• Approved by the California Office of Statewide Health Planning and Development (OSHPD)
• Size Range - 1/8", 3/16" and 1/4" pre-stretched cable. Fits rod size 3/8" - 3/4".

Download Printable Cut Sheet

Submittals for Fig. 991 - Fast Attach - Cable Sway Brace Attachment

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 991 - Fast Attach - Cable Sway Brace Attachment

Download pricing catalog

Information

Fig. 990
Cable Sway Brace Attachment

• Cable attachment for sway bracing. Attaches sway brace to structure or to hanger. To be used with 7 x 19 strand core pre-stretched galvanized aircraft cable.
• Size Range - 1/8", 3/16" and 1/4" pre-stretched cable. 3/8" - 1 1/4" hanger rod bolt or fastener.

Download Printable Cut Sheet

Submittals for Fig. 990 - Cable Sway Brace Attachment

Download Printable Cut Sheet.

Fig. 990 - Cable Sway Brace Attachment

Size Range — 1/8", 3/16" and 1/4" pre-stretched cable. 3/8" thru 1 1⁄4"
hanger rod bolt or fastener.
Material — Carbon Steel
Function — Cable attachment for sway bracing. Attaches sway brace to
structure or to hanger. To be used with 7 x 19 strand core pre-stretched
galvanized aircraft cable.
Features — Cable easily slides into oversized front arch opening.
Breakaway hex nuts assure verification of proper installation. Will mount
to any surface angle.
Approvals — Included in our Seismic Restraints Catalog approved by the
State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint System
Guidelines.
Finish — Electro-Galvanized
Order By — Figure number, cable size and mounting hole size.
Note — Order 990H for hanger rod, bolt or fastener hole size 1" thru 1 1⁄4".

Pricing

Receive a quote for Fig. 990 - Cable Sway Brace Attachment

Download pricing catalog

Information

Fig. 98B
Rod Stiffener w/Break-off Bolt Head

• Secures channel to hanger rod for vertical seismic bracing.
• Size Range - Secures 3/8" - 7/8" hanger rod

Download Printable Cut Sheet

Submittals for Fig. 98B - Rod Stiffener w/Break-off Bolt Head

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 98B - Rod Stiffener w/Break-off Bolt Head

Download pricing catalog

Information

Fig. 4A
Pipe Clamp for Sway Bracing

• For bracing pipe against sway and seismic disturbance.
• UL Listed in the USA and Canada 4" thru 8"
• Approved by the State of California Office of Statewide Health Planning and Development (OSHPD)
• For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
• Size Range - 4" - 8" pipe. For sizes smaller than 4" use TOLCO^® Fig. 4.

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 4A - Pipe Clamp for Sway Bracing

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 4A - Pipe Clamp for Sway Bracing

Download pricing catalog