Structural Attachments

Information

Fig. 906
Sway Brace Multi-Fastener Adapter

• Allows sway brace fittings to develop greater load carrying ability by providing multiple fastener attachments. The National Fire Protection (NFPA) provides information on fastener loads to various structures. Refer to NFPA Pamphlet 13 (1996)Edition, Table 4-14.4.3.5.6.
• UL Listed in the USA and Canada only when used with TOLCO 900 Series Earthquake Brace Attachments
• Approved by the State of California Office of Statewide Health Planning and Development (OSHPD)
• For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
• Size Range - Use with 1" and 1 1/4" TOLCO UL listed 900 Series Earthquake Brace Attachments.

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 906 - Sway Brace Multi-Fastener Adapter

Download Printable Cut Sheet.

Fig. 906 - Sway Brace Multi-Fastener Adapter

Size Range - Use with 1" and 11/4" TOLCO UL listed Fig. 900 Series Earthquake Brace Attachments.
Material - Carbon Steel
Application - Allows sway brace fittings to develop greater load carrying ability by providing multiple fastener attachments. The National Fire Protection (NFPA) provides information on fastener loads to various structures. Refer to NFPA 13 (2010) 9.3.5.9.1.
Approvals - Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) only when used with TOLCO 900 Series Earthquake Brace Attachments. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
Installation Instructions - The Fig. 906 is a multiple fastener structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed.
To Install - Attach the Fig. 906 to the structural surface as per fastener design guidelines. Attach other TOLCO transitional attachment fitting Fig. 909, 910, 980 or 986. Transitional fitting attachment can pivot for adjustment to proper brace angle.
Finish - Plain
Note - Available in Electro-Galvanized and HDG finish or Stainless Steel materials.
Order By - Figure number and specify dimensions H1 and H2. See Submittal Chart.

Pricing

Receive a quote for Fig. 906 - Sway Brace Multi-Fastener Adapter

Download pricing catalog

Information

Fig. 828
Universal Sway Brace Attachment

• Used for attaching seismic bracing to various structural members, including wide flange beams, I-beams, C-channel, welded steel trusses, etc
• Permits secure non-friction connection without drilling or welding
• Break-off bolts allow for visual verification of proper installation torque
• UL Listed in the USA and Canada
• Size Range - One size accommodates all TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load 2015 lbs. Fits from 3/8" to 7/8" thick steel structure. For sizes less then 3/8" thick refer to Fig. 825 or Fig. 825A.

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 828 - Universal Sway Brace Attachment

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 828 - Universal Sway Brace Attachment

Download pricing catalog

Information

Fig. 825A
Bar Joist Sway Brace Attachment

• To attach sway bracing to steel bar joist structural members. Important Note- The Fig. 825A is precision manufactured to perform its function as a critical component of a complete bracing assembly.
• UL Listed in the USA and Canada
• For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
• Size Range - One size accommodates all TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load 1265 lbs.

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 825A - Bar Joist Sway Brace Attachment

Download Printable Cut Sheet.

Fig. 825A - Bar Joist Sway Brace Attachment

Size Range - One size accommodates all TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load 1265 lbs.
Material - Carbon Steel Function - To attach sway bracing to steel open web structural members.
Features - This product's design incorporates a concentric attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure non-friction connection without drilling or welding. Unique design reinforces point of connection to joist. Break off head bolt design assures verification of proper installation.
Approvals - Underwriter's Laboratories Listed in the USA (UL) and Canada (cUL). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
Installation Instructions - The Fig. 825A is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed.
To Install - Place the Fig. 825A on the steel beam, tighten the cone point set bolts until bolt heads break off. Attach other TOLCO transitional attachment fitting, Fig. 909, 910, 980 or 986. Transitional fitting attachment can pivot for adjustment to proper brace angle.
Important Structural Note: The TOLCO Fig. 825A has significant UL established design loads, however, structural issues related to the steel joist member require restricted location installation for all bracing. Steel Joist Manufacturers require that all earthquake bracing connections be within 6" of the cord panel point. Installation of the Fig. 825A is not restricted to the two outer third sections of the joist. For greater design loads, refer to TOLCO Fig. 825.
Finish - Plain
Order By - Figure number and finish
Patent #6,098,942

Pricing

Receive a quote for Fig. 825A - Bar Joist Sway Brace Attachment

Download pricing catalog

Information

Fig. 825
Bar Joist Sway Brace Attachment

• *To attach sway and hanger assemblies bracing to steel bar joist structural members. Important Note- The Fig. 825 is precision manufactured to perform its function as a critical component of a complete bracing assembly.
• UL Listed in the USA and Canada
• Approved by the State of California Office of Statewide Health Planning and Development (OSHPD)
• For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
• Size Range - One size accommodates all TOLCO Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load 2015 lbs.

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 825 - Bar Joist Sway Brace Attachment

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 825 - Bar Joist Sway Brace Attachment

Download pricing catalog

Information

Fig. 800
Adjustable Sway Brace Attachment to Steel

• Seismic brace attachment to steel.
• UL Listed in the USA and Canada Approved by the State of California Office of Statewide Health Planning and Development (OSHPD)
• For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines.
• Size Range - 4" - 18" beam width

This product meets the following approvals:
   

Download Printable Cut Sheet

Submittals for Fig. 800 - Adjustable Sway Brace Attachment to Steel

Download Printable Cut Sheet.

Pricing

Receive a quote for Fig. 800 - Adjustable Sway Brace Attachment to Steel

Download pricing catalog